Skip to product information
1 of 6

Jiabaida BMS

JBD Smart BMS 7~21S 8S 16S 20S 200A 300A Communicant PCB with Relay Support UART, Bluetooth or RS485 Function for Lithium Battery LiFePo4 Li-ion

Regular price $135.33 USD
Regular price Sale price $135.33 USD
Sale Sold out
Shipping calculated at checkout.
Specifications
Functions

SMART BMS MODEL: JBD-AP21S002 

This is Jiabaida/JBD offical store on Shopify.

We have smart and hardware bms for lifepo4 and li-ion lithium battery and support to be customized. Please contact us if need more support and cooperation.

QUICK DETAILS

INTRODUCTION 

JBD-AP21S002 is a software protection board scheme specially designed for 7~21 strings of lithium battery packs. The product adopts architecture of front-end acquisition chip + MCU, and some parameters can be flexibly adjusted through the host computer according to customer needs.

PARAMETERS

Cell specifications  7~21 strings of Lithium Iron Battery
Interface type Charge and discharge are both at the same port
Charging voltage 3.6V*Number of strings
Cell voltage
2.2~3.75V
Continuous charging
current
200A 300A
Continuous discharging
current)
200A 300A
Consumption of
running
≤300mA
Consumption of sleep ≤1000uA
Sleep conditions Delay 65000s under no current \ communication \ protection
state (settable)
Circuit resistance) ≤10mR
Operating temperature -30℃~75℃
Size 200±2mm * 114.5±0.5mm * 51±1mm

Supplementary note:

Continuous standing for 65000s (settable) will automatically disconnect therelay and reduce the standby power consumption of BMS. A large charge discharge current will be identified through the pre charge discharge circuit, and then close the relay.

FUNCTIONS

1. Overcharge protection and recovery
2. Over-discharge protection and recovery
3. Charging overcurrent protection and recovery
4. Discharge overcurrent protection and recovery
5. Temperature Protection and Recovery
6. Balance function
7. Capacity calculation
8. Sleep function
9. Communication

TECHNICAL FILES

APPS:

Xiangxiang APP for ANDROID & IOS: 

https://cdn.shopify.com/s/files/1/0606/5199/5298/files/xiaoxiang3.1.1026.zip?v=1662621036

RS485/UART SW for WINDOWS TOOL:

https://cdn.shopify.com/s/files/1/0606/5199/5298/files/JBDTools_V2.9-20210524.rar?v=1662621110

DATASHEET:

https://cdn.shopify.com/s/files/1/0606/5199/5298/files/JBD-AP21S002-_-A.0.pdf?v=1662621392

WIRING DIAGRAM:

https://cdn.shopify.com/s/files/1/0606/5199/5298/files/AP20S006_PNG.rar?v=1662621697

Customer Reviews

Based on 14 reviews
100%
(14)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
K
Kaylah Farrell

All perfect

J
Jessika Lebsack

Not tried yet but quickly book less than 10 france, well designed, flexible 4awg wiring and well welded no risk, must go well for my bike 72v

M
Myles Abshire

best BMS ever

F
Fausto Heathcote

All arrived safely but absolutely no wiring instructions. Took some time and googling to find out how to wire it. I have 8 cells. Basically the black lead from the wider socket goes to most negative, then attach the rest of the leads one by one to each positive of your cells starting with the positive of the cell which is your most negative. Attach the leads in order until you run out of cells: the last one will be attached to your most positive. Then attach the red lead from the smaller socket also to your most positive. Any unused leads (because you have fewer than 24 cells) should be tidied away making sure they do not short each other. Then plug in the sockets to the main unit. Then attach B- (the thick blue cable) also to your most negative. It will click loudly several times and beep. If you do not connect that final red lead to your most positive it will not work. Bluetooth works fine with the app.

C
Camilla Anderson

Good products 👍!